GM Balls

Hi- Chrome Grinding Media Balls:

Growing from strength to strength over 40 years, Atul Engineering Udyog is inspired by a strong legacy and motivated by the vision to remain world-class through a focus on high quality products. Always alert and sensitive about the importance of quality, AEU seeks to present value-added propositions to all customers. It has geared itself by facilitating advanced R&D activities in every area of application to develop best engineered products. Modern plants crush various types of materials leading to a variety of working conditions. These varying conditions require completely different grinding properties from the grinding agent. Our team of experts have done extensive field research and found that the properties required in the grinding media vary from low abrasion, high impact conditions to highly abrasive lower impact conditions. Accordingly, our R&D team has formulated three different grades to cater to these separate requirements as follows :-

Specifications

  • Balls (mm) – 125, 100, 90, 80, 75, 70, 65, 60, 50, 40, 30, 25, 20, 17, 13
  • Cylpebs (mm) – 25×25, 22×22, 19×19, 16×16
Working conditions Low abrasion medium impacts Low abrasion high impact High abrasion high impact High abrasion low impact High abrasion low impact High abrasion low impact
Application First Chamber cement & raw mill First Chamber cement& raw mill First Chamber cement& raw mill Second Chamber of cement raw mill and Coal mill Second Chamber of cement raw mill and Coal mill Second Chamber of cement raw mill and Coal mill
ATUL GRADES ATUL – I ATUL – II ATUL – III
Hardness(HRC) 58-62 60-64 61-65 59-64 60-65 60-65
Cr % 14-18 14-18 18-22 16-20 16-32 16-32
C % 2.0-3.0 2.0-3.0 2.5-3.5 2.O-3.0 1.5-2.5 1.5-2.5

Hyper Steel Grinding Media Balls

As per the variegated application requirements of clients, they can avail from us a quality range of Hyper steel grinding Media Balls and Cylpebs in various diameters and technical specifications. These grinding media balls and cyplebs are widely utilized in grinding and milling applications.

Specifications:

  • Chemical composition: The chemical composition of the grinding media is in accordance with IS 6079-1989
  • Hardness: When tested in accordance with IS 1500/1983, the hardness is found to be more than 375 BHN
  • Microstructure: Microstructure is free from continuous carbide network
  • Heat treatment: The grinding media is heat treated to obtain the required hardness and microstructure
  • Balls diameter (mm) – 125, 100, 90, 80, 75, 70, 65, 60, 50, 40, 30, 25, 20, 17, 15
  • Cylpebs (mm) – 35 x 35, 25×25, 22×22, 19×19
  • Hardness: When tested in accordance with IS 1500/1983 the hardness at any point across the section of the ball is more than 375 BHN.
  • Microstructure: Microstructure shall be free from continuous carbide network.
  • Heat treatment: The grinding media is suitably heat treated to obtain the required hardness and Microstructure.
  • Standard size of grinding media: Balls diameter (mm)-125, 100, 90, 80, 75, 70, 65, 60, 50, 40, 30, 25, 20, 17, 15 Cylpebs (mm)-35 x 35, 25×25, 22×22, 19×19

Hyper Steel Grinding Media Ball

Grade-1 (For size 60 mm & above) Grade-2(For size below 60 mm)
Carbon 1.25-1.50 1.60-1.90
Silicon 1.00 Max. 1.00 Max.
Manganese 1.20-1.50 1.20 -1.50
Chromium 1.50-2.00 1.50-2.00
Sulphur 0.06 Max. 0.06 Max.
Phosphorus 0.06 Max. 0.06 Max.

Tolerance on size: Variation on size shall not exceed the following limits:-

Shape and size Tolerance (mm)
(1) Balls for sizes 60 mm & above +/- 2.50
(2) Balls for sizes 30 to 50 mm & below +/- 2.00
(2) Balls for sizes 15 to 25 mm & below +/- 1.50
(3) Cylpebs for all sizes +/- 1.50